HP HPE6-A80 echte frage : Aruba Certified Design Expert Written Exam

Auch 2026 gehört die Zertifizierung hinter der HP Aruba Certified Design Expert Written zu den gefragten Nachweisen der IT-Branche. Mit den 62 Übungsfragen von EchteFrage bereiten Sie sich praxisnah auf die HPE6-A80 Prüfung vor.

HP HPE6-A80 Prüfungsübersicht:

Zertifizierungsanbieter:	HPE Aruba Networking
Prüfungsname:	Schriftliche Prüfung zum Aruba Certified Design Expert
Prüfungsnummer:	HPE6-A80
Verwandte Zertifizierungen:	Aruba Certified Design Expert (ACDX)
Prüfungsformat:	Schriftliche Prüfung, Multiple-Choice-Fragen
Verfügbare Sprachen:	Englisch
Beispielfragen:
Prüfungsmethode:	Prüfung im Pearson VUE-Prüfungszentrum oder zugelassene Online-Prüfung mit Aufsicht (je nach regionaler Verfügbarkeit).
Voraussetzungen:	Erforderlich vor der Anmeldung zur praktischen Prüfung zum Aruba Certified Design Expert.
Offizielle Syllabus-URL:	https://certification-learning.hpe.com/tr/datasheet/exam/HPE4-A39?version=6

HP HPE6-A80 Prüfungsthemen:

Alles Wichtige zur HP Aruba Certified Design Expert Written im Überblick

HP Aruba Certified Design Expert Written HPE6-A80 Prüfungsfragen mit Lösungen

Frage #1

A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?

A. MM-HW-1K appliance
B. MM-HW-5K appliance + MM-HW-5k appliance
C. MM-HW-1OK appliance
D. MM-HW-5K appliance

Frage #2

Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

A. about 6-4
B. about 23-32
C. about 13-16
D. about 6-8

Frage #3

Refer to the exhibit.



A customer needs a wired network upgrade and has complained about performance issues. The architect collected information about traffic now on several switch ports in different locations across the network, and the results are shown in the exhibit. Each of these ports is a 1Gbps port.
What can the architect conclude?

A. Port 1 shows periods of congestion; other ports are not congested.
B. Port 3 snows periods of congestion; other ports are not congested.
C. All of the ports show serious congestion
D. None of these ports show any periods of congestion

Frage #4

A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID's for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?

A. lAPs with Aruba central
B. CAPS and branch office controllers
C. RAPs and branch office controllers
D. IAPs with branch office controllers

Frage #5

Refer to the exhibit.

A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.
The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)

A. Connect the switch stack on each floor directly to the network cone on two "fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter-building fiber.
B. Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.
C. Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.
D. Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology.
Connect two Floor f members to the network core with one fiber connection each
E. Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.

Fragen und Antworten: